Tinovi WiFi Gadget connecting to cloud  

  RSS

 E.M.
(@edgars_ma)
New Member
Joined: 2 years  ago
Posts: 2
26/10/2016 11:47 am  

Hello,

I have registered account and want to connect WiFi device to cloud, it does not appearing in my account...

E.


ReplyQuote
(@edgarsma)
New Member Admin
Joined: 2 years  ago
Posts: 3
26/10/2016 12:04 pm  

To connect Tinovi Wifi board to cloud it has embedded access point. So at first you have to switch WiFi device on by connecting it to 5v micro-USB power supply, an then several times try searching from any WiFi enabled device like you smart phone or laptop for TinoviAP access point. Then connect to TinoviAP device and type in web browser address 192.168.4.1 and will appear form with local wifi access point list. Choose your home wifi router from this list and input your routers password. (Also in this screen you may change device's default pin code what is used later on device registration.) Tinovi WiFi gadget will switch off AP mode and will try to connect to your home router. If connection was successful you have to see this device as pending device in you tinovi.io dashboard account in devices section. NOTE! to see pending device in your device list you have to access dashbaord from some home router as your device is connected. You may ad pending device to device list by entering pin code "1111" or one you have set during choosing you home router when configured device. 

Edgar

 


ReplyQuote
 E.M.
(@edgars_ma)
New Member
Joined: 2 years  ago
Posts: 2
26/10/2016 12:08 pm  

Hi, thx, managed to connect. But now I have new problem, how to connect to another wifi router?

E.


ReplyQuote
(@edgarsma)
New Member Admin
Joined: 2 years  ago
Posts: 3
26/10/2016 12:19 pm  

There iss two options to reconnect device to another WiFI router:

1. in case WiFi gadget can't access  configured router after some time it should go to AP mode, and you will be able to acces it from WiFi enabled device and reconfigure new home router from address 192.168.4.1

2. Hard reset - push reset button for second, depress it and immediately push prog button for second or more. In this case device will immediately start in to AP mode and will ignore other previous settings.

Edgar.


ReplyQuote
Share:
Share on social networks